200’ Garden Row Crop Irrigation Kit– DK-RC1
An excellent kit for first timers wanting to try drip irrigation
in a small garden. This kit uses 5/8" 15 mil high flow drip tape with emitters spaced
every 12" for uniform watering. The system can be expanded easily and contains enough
drip tape for ten 20’ rows.
DK-RC1 KIT |
| 1 |
Hose bib vacuum breaker |
1 |
0.250" barb black handle
hole punch |
| 1 |
¾" hose thread tee
filter (150 mesh element) |
10 |
Dual goof (mistake) plugs
0.175" x 0.250" |
| 1 |
10 PSI pressure regulator
(1/3-12 GPM) |
5 |
0.250" barb x tape loc
adapters |
| 1 |
½" poly hose x ¾"
fht swivel connector |
3 |
0.250" barb x tape loc
adapters w/valve |
| 1 |
½" poly hose coupling |
1 |
Tape loc coupling |
| 1 |
50’ roll ½" poly
drip tubing |
2 |
100’ roll 15 mil
12" spacing drip tape (0.45 GPM per 100’) |
| 2 |
½" figure 8 hose ends |
15 |
Sta-Put wire anchors (for
staking tubing and tape) |
750’ Garden Row Crop Irrigation Kit – DK-RC2
An expanded kit for those wanting to use drip irrigation on medium
to large gardens. This kit uses 5/8" 15 mil high flow drip tape with emitters spaced
every 12" for uniform watering. The system can be easily expanded and contains enough
drip tape for ten 75’ rows.
DK-RC2
KIT |
| 1 |
Hose bib vacuum breaker |
2 |
½" figure 8 hose ends |
| 1 |
¾" hose thread tee filter (150 mesh
element) |
1 |
0.25" barb black handle hole punch |
| 1 |
10 PSI pressure regulator (1/3-12 GPM) |
10 |
Dual goof (mistake) plugs 0.175" x
0.250" |
| 1 |
½" poly hose x ¾"
fht swivel connector |
10 |
0.250" barb x tape loc
adapters |
| 1 |
½" poly hose x ¾" fht swivel
tee |
5 |
0.250" barb x tape loc adapters
w/valve |
| 1 |
½" poly hose tee |
2 |
Tape loc coupling |
| 2 |
½" poly hose 90 degree elbow |
1 |
750’ roll 15 mil 12" spacing
drip tape (0.45 GPM per 100’) |
| 2 |
½" poly hose coupling |
30 |
Sta-Put wire anchors (for staking tubing
and tape) |
| 1 |
100’ roll ½" poly drip tubing |
|
|
100’ Emitter Tubing Drip Irrigation Kit – DK-ET1
This kit features heavy wall ½" poly drip irrigation tubing
with 1 gallon per hour emitters pre-installed on an 18" spacing. A great way to drip
irrigate small gardens, shrub beds, and around the perimeter of homes for foundation
stabilization. It features 100’ of emitter tubing and everything else needed to get
started. The heavier wall thickness means it can be moved and handled more often with less
damage than the drip tape systems. Additional tubing and fittings can be added to expand
this system to single runs up to 300’.
DK-ET1
KIT |
| 1 |
Hose bib vacuum breaker |
| 1 |
¾" hose thread tee filter (150 mesh
element) |
| 1 |
25 PSI pressure regulator (1/3-12 GPM) |
| 1 |
½" poly hose x ¾"
fht swivel connector |
| 1 |
½" poly hose x ¾" fht swivel
tee |
| 1 |
½" poly hose tee |
| 2 |
½" poly hose 90 degree elbow |
| 2 |
½" poly hose coupling |
| 1 |
100’ roll emitter tubing with 1 GPH
pressure compensating emitters spaced 18" apart |
| 2 |
½" figure 8 hose ends |
| 10 |
Sta-Put wire anchors (for staking tubing
and tape) |
|
